How to use shoes toe lasting making machine related technology in shoe factories

How to scientifically use the toe lasting machine and related technology in shoe factories

shoes machine https://www.shoes-machine.com shoe machine shoe machinery  shoe making machine

At present, more and more factories have used the toe lasting machine instead of manual shoe climbing. The toe lasting machine has high work efficiency and production explosive power. It can receive large orders with short delivery time. The average daily output of 10 people can reach 1000 pairs, and the manual can be up to 400 pairs. Of course, the toe lasting machine with memory automatic gluing function will achieve higher efficiency. However, many factories are not familiar with the toe lasting machine and are unable to give full play to the functions of the machine.

The following points shall be paid attention to during the transition from manual shoe climbing to machine shoe climbing:

1、 Supporting equipment: toe molding machine, back part moulding machine, vamp steaming machine, heel steaming activation machine;

2、 Board room requirements: the upper angle of manual board is much larger than that of machine board. First, it wastes raw materials; Second, the toe cap is extremely uneven when tying the upper, resulting in hair angle or sweeping the upper. The machine board requires moderate cutting, especially the position of high whip surface warpage;

3、 Supporting shoe materials: check whether the midsole exceeds the shoe last. If yes, trim it with scissors or slightly smaller than the toe cap. For special toe caps with large warpage, slightly stick the toe cap of the midsole with white glue or double-sided glue before binding. In short, the midsole roughly matches the toe cap, and there is mesh silk wool on the surface to enhance the adhesion; White latex shall be used along the glue of the midsole and the corner of the upper. The proportion of Gang bao water and Kuai yu agent shall be moderate. Too dry and too wet will have a great impact on the lasting effect;

4、 Skilled operators: the front upper is handmade for a long time, the thumbs of both hands are flat and wide, the gestures are correct during operation, and the upper and heel should be clamped correctly;

5、 When making the confirmation board, the new body needs to use the toe lasting machine for trial production. When there is no problem, it can put the uniform code and turn to mass production; The front helper must cooperate with the plate maker to test the plate and repair the plate to ensure the smooth progress of on-site production;

6、 Mechanized production is a production mode with the cooperation of multiple departments, and the requirements are strict; Close cooperation between various production departments is the key. It is suggested that the original place of use adopts the group piecework mode, which is conducive to the advancement of the process.

Home  ꄲ  Shoes Machine Technology  ꄲ  How to use shoes toe lasting making machine related technology in shoe factories
녔Previous： null
녒Next： null
Copyright © Guangdong Dafeng Shoes Making Machine Co., Ltd.

版权所有 Copyright(C)2018-2022 佛山市大锋机械设备有限公司 粤ICP备14003645号-1