-
-
- Shoe Production Line Series
- Toe Lasting And Heel Lasting Machines
- Shoe Moulding Machines
- Sole Press Machines
- Shoe Upper Steaming And Softening Machines
- Shoe Steam Heat Setting And Chill Setting Machines
- Shoe Heel Nailing Machines
- Shoe Flattening And Hammering Machines
- Shoe Roughing And Polishing Machines
- Insole And Outsole Making Machines
- Shoe Upper Making Machines Series
- Shoe Sewing Machines
- Leather Measuring And Inspection Machines
- Shoe Cementing Machines
- Others Shoemaking Machines
- Leather Production Machinery
- Shoe Machine Accessories And Tools
-
-
-
-
-
one cold and one hot leather shoe making backpart counter moulding molding machine
leather shoe making backpart counter moulding molding machine
Product describe
- The outer edge of heel vamp can be folded inside at the same time and the general heel can be shaped at the same time.
- Harbor Treasure Shaping Applicable to Various Materials
- Equipped with a broom, the upper can be adjusted and other functions.
- The tilting last head is more convenient to operate.
- Temperature of internal and external die can be adjusted by material itself.
- Internal and external moulds are customized according to customer's last, which can achieve more perfect appearance effect.
- Adjustment fixture makes upper and last 100% fit.
- With the environment-friendly refrigeration system, the refrigeration speed is fast, and the refrigeration temperature can reach 30 degrees below zero.
- After stereotyping, the lining, film and vamp are closely adhered to each other without wrinkling, deforming or blistering.
- A clamping device for hollow shoes Special functions:
- The machine is equipped with hollow shoes positioning system, which can switch with the pull-down system.
- Adjustment of hollow positioning system: The height of the clamp is the same as that of the lower surface of the aluminum die. Attention should be paid to the distance between the clamp of the cold die part and the sole of the aluminum die to keep the thickness of the shoe upper, not too big or too small. If the gap is too small, the upper will drag. If the gap is too large, the broom will be inserted between the positioning device and the aluminum mould, which may damage the clamping device. When the clamping device is not used, it can be adjusted to the lowest position and retracted to reduce friction with the broom. The closer the hot die part is to the bottom of the aluminum die, the easier it is to clamp and locate.
|
MODEL |
MACHINE SIZE |
Air pressure |
Power |
N.W |
Voltages |
Production |
|
DF-968N |
750x550x1850mm |
0.5Mpa |
800W |
205kg |
220v/50HZ |
1000pairs/8hrs |
